Gentlemen, Thank you for all the kind words of encouragement and the sound techanical advise.... My Tech friend and I just spent 3 Hours working on the oil line.. It was touch and go for awhile... Firstly, It was very difficult to disconnect the oil line from the oil cooler,, Had to use 2 wrenches and a lot of patience.. Secondly, all the lines ran so close to one another,, very little room to operate... Thirdly, after replacing the oil line to the oil cooler, and starting the motor I noticed a slight oil leak at the fitting to the oil cooler ,, about 1 drop a minute.. I tightened the fitting a bit ,, I was careful not to over tighten...I guess I will find out tomorrow if there are any more leaks.....

Thanks for all the help gang.......

Juan.....