|
to filter WMO, cut with some gas, like 1 gallon to every ten of WMO, (i get old gas from peoples boats and rv's and such for doing this, so its free) this thins it considerably, then pour through first a 1 micron filter sack, then a half-micron filter sack.....will run right through the sack quickly, store it dry of course, and use no more than 40 or so percent of this mix per tankful of diesel, and you are good.....filtering and using waste transmission oil and hydraulic oil in this method, this oil is much better to run filtered, as WMO, imho.....and u do not add gas to the atf or hydraulic oil......i have run 75 percent atf with no oil heating system in my 240, with no bad results.....i am sure that with the preheating system, atf and even wmo performance and burnability would increase considerably.....
|