I don't have an OE harness on mine as I've got an aftermarket EFI but I *think* that wire goes down to a solenoid on the trans. This model should have an additional solenoid very similar to the kickdown solenoid with pipes that mount it near the bellhousing by the starter. I dont think it could hurt anything being broken so long as it doesnt short to ground while it is active.
__________________
90 300TE 4-M
Turbo 103, T3/T04E 50 trim
T04B cover .60 AR
Stage 3 turbine .63 AR
A2W I/C, 40 LB/HR
MS2E, 60-2 Direct Coil Control
3" Exh, AEM W/B O2
Underdrive Alt. and P/S Pulleys,
Vented Rear Discs, .034 Booster.
3.07 diffs 1st Gear Start
90 300CE 104.980
Milled & ported head, 10.3:1 compression
197° intake cam w/20° advancer
Tuned CIS ECU
4° ignition advance
PCS TCM2000, built 722.6
600W networked suction fan
Sportline sway bars
V8 rear subframe, Quaife ATB 3.06 diff
|