Your point gap is measured in degrees of dwell...factory setting is 30-34 degrees. If you set the gap at .012-.014 inch you should be in the ballpark, but, if you can, check it with the meter and re-adjust as necessary. Shoot for the low end, i.e. 30 degrees so the dwell will stay within spec as the points wear

__________________
Ron
2015 Porsche Cayman - Elizabeth
2011 Porsche Cayman - Bond,James Bond
Sadly MERCEDESLESS - ALways LOOKING !
99 E320 THE Queen Mary - SOLD
62 220b - Dolly - Finally my Finny! Sadly SOLD
72 450SL, Pearl-SOLD
16 F350 6.7 Diesel -THOR
19 BMW X5 - Heaven on Wheels
14 38HP John Deere 3038E Tractor -Mean Green
84 300SD, Benjamin -SOLD
71 220 - W115-Libby ( my first love) -SOLD
73 280 - W114 "Organspende" Rest in Peace
81 380 SL - Rest in Peace