View Single Post
Old 12-22-2002, 07:07 PM
Senior Member
Join Date: Sep 2002
Posts: 2,486
The lifters are removed through the other end of the rocker arm! A small punch will knock out the old ones, but don't lose the little discs that sit up against the clip. When re-assembling, install the discs first. They need to be placed squarely in the bore. Simply push the new lifters into the bores with thumb pressure. You'll know when it's in all the way by the way it feels, trust me. If you have a valve tap afterwards don't worry. It takes some time for the new lifters to bleed out the air. Good luck and let me know how it goes.
Reply With Quote