Thread: Tensioner help!
View Single Post
Old 12-23-2002, 03:27 PM
drbrandini's Avatar
drbrandini drbrandini is offline
Join Date: Sep 2001
Location: Wrightsville Beach NC
Posts: 1,512

After much trouble I finally freed the fan pulley, I then loosened the 19mm bolt, before trying to loosen the adjuster nut up top. I decided to pull on the belt it was a bit snug but I managed to pull it off without adjusting the top..Do I still need to loosen it so that the belt will go on without trouble? I am also looking for so torque specs for the tensioner shock and idler pulley as well as the 4 mounting bolts for the fan pulley. Any idea where to get these?

Thanks again you've been I big help.

2008 S550
1957 Dodge D100
1967 VW Microbus 21 Window
2001 Suburban
2004 Beach cruiser bicycle
-----------------GO DUKE!-----------------

"It cannot be emphasized too strongly or too often that this great nation was founded not by religionists, but by Christians; not on religion, but on the Gospel of Jesus Christ. For that reason alone, people of other faiths have been afforded freedom of worship here." Patrick Henry 1776
Reply With Quote