Absolutely it's possible. it's a completely seperate piece. You can order it if you want it on there. You can see where it goes. It snaps onto the tiny serrated teeth you can see between the front bracket and the tensioner itself, kind if down in that groove.
The bracket will need to be removed to install it though, which involves removing the belt pulley that runs the cooling fan, and the pulleys for the power steering and water pump. There are 3 bolts that hold the bracket on, one over near the crank position sensor, and 2 over near the power steering reservoir. The slightly tough one is the bottom one by the power steering, as it has a nut on the back side of it that needs to be held with a wrench.