Actually the idle is rougher than I would like. I thied cleaning the idle valve, it was pretty dirty but no change. I thought I would go back to basics and check timing and error codes.
1. Are there codes and if so how do I read them? I can't find anything in the manual on it.
2. I found some specs on timing (3-7B no vac, 10-14 with) but can't find a procedure or where #1 is. When I used the driver front the reading was off the scale. I moved to what is #2 in most V-8's I was on the scale but moving the distributor had no effect. What gives?
Any help would be greatly appreciated!