View Single Post
  #37  
Old 06-17-2013, 10:03 PM
mach4's Avatar
mach4 mach4 is offline
Registered User
 
Join Date: Jul 2011
Location: San Diego County, CA
Posts: 2,736
Quote:
Originally Posted by ROLLGUY View Post
I know that you had no choice but to to it this way, and I commend you for being able to accomplish it. For the normal 123, 126, 116 applications, there are hoses and a bracket in the way of where the adjusting rod would be.
Good point. I should have stipulated that I did some significant modifications to the oil line support bracket in order to support the modified oil cooler lines I used.





It's been so long since I did the oil cooler line mod, I forget how the original lines ran. And I should also state that I'm using an oil filter and lines off an SD (126) that may put the lines in a different relative position.

I think the point I was trying to make is, that if someone wants to try to add some top support, the solution I found is one that works. And if they've got the fab skills to weld up an adjuster rod, moving the cooler lines an inch or two and modifying the support bracket should be within reach.
__________________
Current Stable
  • 380SL (diesel)
  • Corvette C5
  • Manx
  • Baja Bug
  • F350 Powerstroke
  • Auburn Boattail Speedster replica
Reply With Quote