View Single Post
Old 12-31-2002, 04:37 PM
Glick Glick is offline
Join Date: Jul 2002
Location: Carson City Nevada
Posts: 59
I had the same problem with my TE with the exception of the water in the tank. My idle speed control valve was sticking. It's located under the air cleaner with a couple of vacuum hoses attached. The pivot point on the back of it had rust on it therefore was not springing closed or open (don't know which) and the car would die but only when approaching a stop. This would not affect the car off of idle. It may be something to check if it does stall when approaching a stop.
Reply With Quote