Originally Posted by Diesel911

When I was trying to remove My lock Tumbler I saw what I thought was a Hole and the Wire I was using went in the hole a bit.

What I found out was that was a Roll Pin in that Hole. I had to rotate the Lock a little more Clockwise to find the actual Hole.

There is a special Tool for turning the Sleeve. I think Pelican sells it. At least you can take a look.
The tool is basically a tube that is tapered inside and lined with a soft Plastic type substance to garb onto the Sleeve when you rotate it.

The Tumbler has 2 metal blocks that rise up when you insert it and pull out the Pin. The larger Block locks into a recess inside of the Sleeve.