Quote:
Originally Posted by cooljjay
FYI to replace the rear shocks...the backseat must come out....that is labor intensive and its possible many shops may not do that....as if they destroy the sun baked upholstery.... The client will say it was their fault....because of the labor charge on both shocks and motor mounts, confirm you are using blistein shocks and non uro mounts..
|
I had the rear seats out and back in when doing the rear defroster glass. Takes minutes. Push one tab in on seat bottom, lift up, do the same with the other tab then pull seat bottom out. That's one minute. Lift up on seat back and take out. That's another minute. Is that labor intensive?