View Single Post
Old 08-03-2013, 01:48 PM
charmalu charmalu is offline
Registered User
Join Date: May 2007
Location: Out in the Boonies of Hot, Dry, Dusty, Windy Nevada
Posts: 9,585
Get a seat bottom spring box out of a W126 second gen ( 86 - 91), preferably from the pass side, doesn`t get as much use. swap the seat tracks and install your fabric etc... will have good up graded springs and the rubber pieces in the corner coil springs.

Done it to 2 cars.

The pass side of the 123 will also swap over after swapping the seat tracks, and there is a hole in the seat frame back for the Arm rest, just have to cut the hole in the MB Tex. remove the back cover to see where the hole is.

Dosn`t make since to use another drivers seat that has been butt pounded for years and miles.

Seems like there was a thread or I was talking to someone recently, that they used 124 seats in a 123. what about the W201, (190E/D) or are they too narrow?

there were three HP ratings on the OM616...

1) Not much power
2) Even less power
3) Not nearly enough power!! 240D w/auto

Anyone that thinks a 240D is slow drives too fast.

80 240D Naturally Exasperated, 4-Spd 388k DD 150mph spedo 3:58 Diff

We are advised to NOT judge ALL Muslims by the actions of a few lunatics, but we are encouraged to judge ALL gun owners by the actions of a few lunatics. Funny how that works
Reply With Quote