View Single Post
  #2  
Old 01-08-2003, 10:18 PM
ILUVMILS's Avatar
ILUVMILS ILUVMILS is offline
Senior Member
 
Join Date: Sep 2002
Location: New Jersey, U.S.A.
Posts: 2,461
It sounds like the regulator is missing a few teeth. The best way to tell is to take it apart and have a look at it. The reason it goes down smoothly is that it's spring loaded to help it lower quickly. On the way up, the motor has to overcome the spring tension. I'll bet the last couple of teeth on the regulator are worn out. Make sure you look at the gear on the motor as well. Good luck
Reply With Quote