Quote:
Originally Posted by Air&Road
It sounds like you don't have access to an impact wrench. If not, try to borrow a hefty 1/2" drive impact and enough air compressor to run it long enough to bust it loose.
Good luck with it.
|
Quote:
Originally Posted by kerry
Don't know if this is the same flange nut as yours but this guy says Sears sells a standard socket that will fit. If so, I'd buy it and try an electric or air impact wrench. Hf has a pretty cheap 110 volt impact wrench.
Transmission Output Flange Seal Replacement
|
I have a cheapo half inch impact that does pretty well at tightening but for some reason won't loosen worth a crap. Doesn't make sense.
Strange thing is, I also have a 110 half inch impact wrench that I completely forgot about. They say memory's the second thing to go and I forget what the first one is. I too worried about the skinnied up wall on the big socket.
I may try it if the next solution doesn't work.
That's a good link, BTW. Has a number of good bits of info. I searched but didn't find that one.