View Single Post
  #54  
Old 10-14-2013, 04:35 PM
cooljjay cooljjay is offline
Registered User
 
Join Date: Jul 2008
Posts: 3,740
Quote:
Originally Posted by junker68 View Post
I don't know Kerry, I'm just throwing things out there and letting everyone know what I did and tested.

Cooljay, I did remove the 30mm bolt and removed the spring and replace it.
I replaced the two valves, o-rings and cleaned out all of the gunk.

That cam you speak of, it did roll freely, but it was in a stationary position in relation to "pivoting," so to comment on your comment that it is sticking out. It did not move. When pushing on it, the cam did not push into the lift pump housing. I guess your telling me it should, I did not read the link you posted.

Thanks
That is your problem.....that cam/roller is suppose to push in to the lift pump, when it does, you will hear it pump.....both the ones I had a that were used on my car with wvo had the same issue....it was froze solid, that is why I tossed them and got a known good one....

Another link to read and a picture of what is behind the cam



Lift Pump

__________________
Reply With Quote