View Single Post
Old 01-09-2003, 10:40 PM
Gilly's Avatar
Gilly Gilly is offline
Registered User
Join Date: Mar 2001
Location: Evansville WI
Posts: 9,616
The bolts that attach the flex plate to the crankshaft are initially torqued to 30-40nm, then angle torqued an additional 90-100 degrees. Before installing these bolts, theck the thickness of the "neck" between the head of the bolt and the threads, the neck can be no thinner than 9.3mm.
The bolts that attach the torque converter to the flex plate are torqued to 20nm.

Reply With Quote