View Single Post
Old 10-23-2013, 06:09 PM
1project2many 1project2many is offline
Registered User
Join Date: Jan 2013
Location: Lakes Region, NH
Posts: 179
Do not remove the lower skirt. You could cause piston slap and / or scuffing wear in the bores. You could contour the skirt but that's not where I'd be working.

Look at the pin bosses. From 2:00 to 4:00 looks thinner than 8:00 to 10:00. There's a fair amount of unmachined area there to cause variance.
When life gives you lemmings... make lemmingade.
Reply With Quote