View Single Post
  #5  
Old 11-06-2013, 01:35 PM
eatont9999's Avatar
eatont9999 eatont9999 is offline
Registered User
 
Join Date: Jan 2012
Location: Dallas, TX
Posts: 1,948
Quote:
Originally Posted by Adriel View Post
Thank you all for the help!

Somewhere I have a picture or pictures of the right side, so think I can figure that out. The left side I have nothing.

I have attached pictures of the hoses I have. As you can see I am talking about the hose on the left that makes a U-turn.

Sad to see N.L.A., but next time I see a 300D, will see if the heater hoses are any good.

Oh, and the reason I pulled the metal pipes was to make it easier to pull the anti-sway bar and they are rusty. Tried the apple cyder vinegar trick, but only made them more rusty... Will go back to what I know: phosphoric acid. Just wanted something enviromentally friendly, but alas, there isn't anything.
Take your old hose to some parts stores and see if you can match it up with a section from another hose and just cut out what you need. You will have to buy the whole hose, though.
__________________
1991 F250 super-cab 7.3 IDI. (rebuilt by me) Banks Sidewinder turbo, hydroboost brakes, new IP and injectors.
2003 S430 - 107K
1983 300SD - Tanoshii - mostly restored ~400K+.
1983 300SD - Good interior. Engine finally tamed ~250K.
Monark Nozzle Install Video - http://tinyurl.com/ptd2tge
Reply With Quote