View Single Post
Old 11-06-2013, 06:46 PM
JB3 JB3 is offline
Registered User
Join Date: Jan 2010
Location: RI
Posts: 6,980
Originally Posted by DeliveryValve View Post
I've installed cardone axles 2 times before and the ride has always been good. But the problem with both installs is the boots always started surface cracking after year two and the cans were loose at the seems in that the grease was slinging from it. Cardone uses grease, never oil.

If the cans are tight, than an Astoria reboot is good option, if not, than new cans would be needed. Which means the axle joints would need to be pressed out.

looks like you nailed it.

The driver side is not yet slinging grease, but its awful wet all around, so both axles turn out to be junk.

The passenger axle boots were really hardened rubber, compared to the driver side. what a waste of money these axles turned out to be
This post brought to you by Carl's Jr.
Reply With Quote