View Single Post
  #63  
Old 11-12-2013, 10:27 AM
vstech's Avatar
vstech vstech is offline
DD MOD, HVAC,MCP,Mac,GMAC
 
Join Date: Mar 2006
Location: Mount Holly, NC
Posts: 26,843
Quote:
Originally Posted by junker68 View Post
Well, car is running and running nicely.

Here's what I did...

First removed and rehabilitated the lift pump, thanks again to everyone here.
Removed lift pump and freed piston, thanks Cooljay, for pointing that out to me.
Reinstalled lift pump.
Still had issues, so I had to clear the fuel lines (should have done that first).
Then I removed and cleaned the tank (should have done that first).
You should have seen the junk that come out of the tank.
Took the car out yesterday and it was like it had come off the assembly line.

Then another issue I had to tackle, I mentioned it here earlier, the car would not start,except when it wanted to.
After days of frustatration, different tests, the replacing of parts and searching this site, it turned out to be the relay which controls the seatbelt/starter interlock system which was a safety requirement on the 1974models.
One of the most frustrating issues I had to tackle, because it was so simple, yet difficult to track down.

If it wasn't for this forum/site, I would still be searching.

Anyway, I said it once before, I'll say it again, THANKS!
WHAT????

in 1974 the SEATBELT was required to start the car???

anybody wanna explain this to me??
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread
"as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do!

My drivers:
1987 190D 2.5Turbo
1987 190D 2.5Turbo
1987 190D 2.5-5SPEED!!!

1987 300TD
1987 300TD
1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere!
Reply With Quote