Thread: Intake elbow
View Single Post
  #5  
Old 11-13-2013, 06:18 PM
Dan Stokes Dan Stokes is offline
Registered User
 
Join Date: Sep 2012
Location: Wilmington, NC by the Atlantic ocean
Posts: 2,508
I just ordered up some bits for the S-10 from these guys:


Intercooler Pipe Fabrication - Silicone Intake Systems Auto Parts (don't know why it's adding the spaces here)

Anyhow, they had the silicone adaptor hose from my new turbo to the intake on the OM617 (2" to 2 1/2") as well as T-bolt clamps and all was cheap. They have 90*, 45*, 180* in case you have to cut your own angle out of the 180, and pretty much anything else you can think of - in THREE colors! Red, blue, and black, though they were out of mine in blue so I went with black. Anyhow, if you have the diameters you're working with I'm sure you can find something that will work.

Sounds like yours is old and hard (no comments from the Peanut Gallery!). (Let's see who gets THAT reference).

Dan
Reply With Quote