Information for modifiers

Over all length of the 717.412 from the end of the tongue that sticks out from the back of the gear box to the mating surface at the bell housing is 51cm



The distance in from the end of the tongue (for the mount) to the surface of the output shaft on to which you mount a flex disc is 4cm

So distance from bell house mounting surface to flex disc mounting surface is 47cm

(Small print - I've done my best with these measurements - they should be good within a few mm - use this information at your own peril!)

Attached Thumbnails

 

__________________
1992 W201 190E 1.8 171,000 km - Daily driver
1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone
1965 Land Rover Series 2a Station Wagon CIS recovery therapy!
1961 Volvo PV544 Bare metal rat rod-ish thing

I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior



Don't leave that there - I'll take it to bits!