View Single Post
Old 01-13-2003, 12:27 PM
Arthur Dalton Arthur Dalton is offline
Registered User
Join Date: Aug 1999
Location: Florida / N.H.
Posts: 8,768
If the lamp did not light when you press the button [ with ig sw ON at run position] , then try pushing button with the eraser end of a pencil. They are hard to press in with your finger. If that does not work, the led is bad or you have a blown fuse to pin 16 in the socket. That is where the 16 pin box gets its 12 volt input.
Reply With Quote