These are 1/2" thick mild steel, the elbows are stamped units with a seam and less than perfectly formed ends and a wall thickness of ~0.100" (see photo)
$100 for a set of flanges
$150 for a set of flanges +10 elbows
Post or PM if you want a set, I accept paypal, money orders, etc. May take a trade for a W115 intake manifold
The 1.25" kits are the easiest to work with, they can be made up with minimal grinding/hammering. The 1.5" kits will take a significant amount of grinding and hammering. It is possible to take a set of 1.5" flanges and weld 1.25" elbows to it (see photo).
I've got the following in stock:
3x sets of 1.25" flanges
3x sets of 1.5" flanges
3x sets of tight radius 1.25" elbows
1x set of tight radius 1.5" elbows
1x set of wide radius 1.5" elbows
1.25" fitment:
1.5" fitment:
1.25" flanges vs 1.5" flanges:
1.5" flanges with 1.25" elbows:
Elbow stamped seam and rough ends:
Tight vs wide 1.5" elbow:
