View Single Post
  #28  
Old 01-21-2014, 02:55 PM
whunter's Avatar
whunter whunter is offline
Moderator
 
Join Date: Dec 2003
Location: Metro Detroit, Michigan
Posts: 17,416
FYI

Quote:
Originally Posted by steamboatsykes View Post
The symptoms were, no heat above ~45mph. The original mono valve diaphragm was torn in the center. Replaced it with an MTC kit.

Still about the same, no heat at higher speeds. If anything, the heat at lower speeds seems warmer but the transition to cold seems sharper as speed increases.
If this has not been resolved ?

Verify there is no air trapped in the cooling system (heater core).

I use many of the MTC units, because most owners accept the higher defective unit trade off versus MB cost.

That said, I would not be even slightly surprised if the new MTC unit was defective.


.
__________________
ASE Master Mechanic
asemastermechanic@juno.com

Prototype R&D/testing:
Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician.
Noise Vibration and Harshness (NVH).
Dynamometer.
Heat exchanger durability.
HV-A/C Climate Control.
Vehicle build.
Fleet Durability
Technical Quality Auditor.
Automotive Technical Writer

1985 300SD
1983 300D
1984 190D
2003 Volvo V70
2002 Honda Civic

https://www.boldegoist.com/
Reply With Quote