View Single Post
  #10  
Old 01-21-2003, 09:19 PM
Gilly's Avatar
Gilly Gilly is offline
Registered User
 
Join Date: Mar 2001
Location: Evansville WI
Posts: 9,616
George
I didn't write down the part numbers, but the shims are identified like this:
NO ID mark=.9mm
1 ID mark=1.8mm
2 ID marks= 2.2mm
There is no shim with 3 marks like I thought there was.
The ball sockets as far as I know have no kind of ID marks

Gilly
Reply With Quote