View Single Post
Old 01-22-2003, 08:58 AM
md21722 md21722 is offline
Registered User
Join Date: Jan 2002
Location: Colorado Springs, CO
Posts: 1,006
If you do the 2-man method don't push the pedal all the way to the floor as it can put the master cylinder in a place its never seen before and force it to deal with corrosion, etc. If you use the pressure bleeder, factory says 30 psi is needed to correctly bleed thru the ABS unit. Pass. rear, drivers rear, pass front, drivers front is the order. I use Valvoline SynPower DOT4 or Ate Super Blue. The Blue is not DOT approved because of its color, but I alternate back and forth. The advantage is when the blue fluid changes to clear fluid (and vice versa) you know all the old fluid is out.
Brian Toscano
Reply With Quote