03-24-2014, 08:40 AM
|
10mm MW
|
|
Join Date: Sep 2008
Location: Michigan
Posts: 767
|
|
Quote:
Originally Posted by sag
so injection pattern angle would be the big difference due to different chamber design?
|
What engine an OEM is using a particular nozzle for does not make any difference as long as the spray angle and the pressure section diameter are correct for the MB engine.
As long as it is a 0 angle nozzle and a 6mm pressure section diameter you are good. The part numbers have the spray angle and the pressure section diameter encoded into it.
|