Quote:
Originally Posted by junqueyardjim
Thanks for the info Diesel 911. I have a new pump for mine and plan to install it this fall. I know that play in the area of that intermediate bushing is critical. Do you know how much play is tolerable?
|
This is what I have in My Notes:
"Timer End Play
I went back and took a closer look at both the CD and book Service Manuals and found it listed as: End plan of intermediate sprocket shaft: 0.05-0.12mm.
In section 07.1-240 of the Service Manual.
I assume this measurement is take with the Timer installed on the Shaft and with no Timing Chain on it to interfere with the measurement."
Maybe simly loosening the Tension on the Timing Chain would work. But, I have never done the job before.
The Picture I barrowed is from one of our Members. So someone has more details on the job then I do.