cigar hose
I believe the cigar shape was a sound deadening design. I have done a lot of oil and I would suggest you get 3/8 Pex Line and use that. Heat up the end (I use a blow torch) and push as far down return steel hose as you can. Make sure to leave a little give so that it can shake. Then attach to the top of the filter fitting. Make sure you get a good seal and you are ready to go. If you can find 1/4 in Pex you can use it for most of the other fuel lines. Except the one that does not have barbs on it. The PEX will not stick to that one.
|