View Single Post
Old 02-05-2003, 12:14 PM
Joseph_H's Avatar
Joseph_H Joseph_H is offline
Registered User
Join Date: Nov 2002
Location: Texas
Posts: 231
Replaced Oil/Temp/Fuel gauge and now this...

Started with oil pressure gauge gone bad (dropped to 0).. Replaced oil sender and still bad gauge. Finally found gauge at eBay and replaced it. Now gauge shoots way up above 3 bar (see picture below) when oil warms up the gauge barely moves down to just above 3. What could it be? Bad gauge or sender? The other gauges (fuel and temp) seem to work just fine. During start up of engine, my oil pressure reads about ~80PSI or about 285 ohms in resistance.. it usually drops after 10-15 minutes. Is that too high?
Attached Thumbnails
Replaced Oil/Temp/Fuel gauge and now this...-oil_temp_fuel-gauge.jpg  

Last edited by Joseph_H; 02-05-2003 at 02:03 PM.
Reply With Quote