I did this job about a year ago. The hardest part was in the corners. Be patient!! I used a little bit of silicone glue in the channel and a putty knife to help coerce the seal into place. I think I started along the top, went to within a couple inches of the corner; then went to the bottom of the side, again working my way to the corner. It did take a bit of cursing and some force to get the corner in, but once it went in, I've had no problems. I must be lucky, because I do not experience any of the wind noice the others talk about. I do know that if you don't seat the top onto the car properly you get a gap at the rear of the window. Best of luck. BOB

__________________
I asked the Lord for everything so that I could enjoy life. He gave me life so that I could enjoy everything!