Thread: 126 wood swap
View Single Post
Old 02-14-2003, 03:37 AM
speedy300Dturbo speedy300Dturbo is offline
Registered User
Join Date: Jan 2001
Location: California
Posts: 2,068
If you pry it off, you WILL BREAK IT. The glovebox piece is the easiest. It is held on by screws on the inside lid of the glovebox. The driver's side is tough, as it is a large piece. You'll need to drop the cover under the dash and remove the screws accessible from behind the wood. There are small screws inside the air vent openings too. Then pull off the headlight switch and unscrew the large nut. Next, remove the cover at the ignition switch. There are screws behind it as well. If the wood doesn't move easily, you probably missed a screw somewhere. The passenger side wood is removed similarly, but is easier! You will need to remove the glovebox door to get to the screws though.

Last edited by speedy300Dturbo; 02-14-2003 at 03:42 AM.
Reply With Quote