View Single Post
Old 03-02-2015, 10:57 AM
KarTek's Avatar
KarTek KarTek is offline
<- Ryuko of Kill La Kill
Join Date: Jun 2007
Location: Bahama/Eno Twp, NC
Posts: 3,258
Hey, great to see you moving forward with this project. This year I'm going to get back on my 606 project that I've been messing with for years. I was without power in the shop for a couple years until I saved up the money to get a new 200A service installed for my Syncrowave.

What is your HP goal? I'm shooting for 400 as a safe limit before internal parts need to be upgraded. Intake charging will be via Eaton M90 feeding a Holset HX40. I'm already running a 7.5mm pump with the stock turbo and the results are impressive.

One thing you might want to consider is a movable vane in the turbo inlet to force all the exhaust into the one side of the scroll to speed spool up. Since you're building your own manifold, it would be easy to integrate.

Just some thoughts.

Benz Fleet:
1968 UNIMOG 404.114
1998 E300
2008 E63

Non-Benz Fleet:
1992 Aerostar
1993 MR2
2000 F250
Reply With Quote