View Single Post
Old 02-14-2003, 05:21 PM
Posts: n/a
Thanks for the reply,
Runs fine, sight miss that goes away after time and I think that is because the valves have got overheated in the porcess and worped. Pulled the plugs again after a heat spell to check for possible clues and seem to be normal. The more I advance the timing from 5ATDC to 15BTDC I can here the valves (metalic noise increases). Also by doing this, advancing the timing is the only thing that I have found so far to decrease the heat and glowing. Everything else I have done has no change.
Reply With Quote