View Single Post
  #2  
Old 02-15-2003, 11:39 AM
MikeTangas's Avatar
MikeTangas MikeTangas is offline
Senior Member
 
Join Date: Apr 2000
Location: So. Cal
Posts: 4,430
Put the jack under the rubber lift points and find a solid place to set the jack stands. On the front look just inboard of the lift point, you should have a structural channel that makes a good stand point. On the rear set the stands under the rear subframe once you've lifted it high enough at the jack point.
__________________
Mike Tangas
'73 280SEL 4.5 (9/72)- RIP
Only 8,173 units built from 5/71 thru 11/72

'02 CLK320 Cabriolet - wifey's mid-life crisis

2012 VW Jetta Sportwagon TDI...at least its a diesel

Non illegitemae carborundum.
Reply With Quote