Quote:
Originally Posted by tyl604
I know this sounds crazy but did you check the belt?
|
Yes the belt is intact and in place.
Quote:
Originally Posted by KarTek
Make sure the light goes out when you shut the door. There may be an interlock on the door switch that prevents it from starting.
|
Checked this as well and all seems fine.
Quote:
Originally Posted by Angel
I would expect that the timer thing itself needs power - and will have power going through certain contacts when the system is supposed to run. Can you check for 110vac (?) through the timer when you press the button ?
Also, I think that there is a relay that turns the motor on and off, check for voltage on that when you press the start button.
if the timer doesn't run on 220v, then there should be a small transformer somewhere, see if that is putting out 110v when needed.
-John
|
I need to get the tester out but I can check. You of course assume that I know what i'm doing with a multimeter
) (I.e do I need to have the dryer plugged in to do this test?)
I see a few thermostats on the diagram but no relays