View Single Post
  #1  
Old 02-22-2003, 11:24 PM
Meza's Avatar
Meza Meza is offline
Registered User
 
Join Date: Jan 2003
Location: SC
Posts: 148
No current at Idle valve or EHA valve 1993 190E 2.6L

I couldn't detect any current going to the idle valve or the EHA valve. I did that at idle. Howevr, car idles fine. I get about 300 miles before the gas light comes on. Black smoke out the muffler under hard kick down....> assumes rich mixture. Sometime I smell gas when exiting a highway (while the car is turning). I assumed my OVP is bad. Fuse on top is fine. I ordered a new OVP (new style with 2 10 Amps fuses ) and will be here next Tuesday. Any suggestions like another fuse or relay to check. Is the operation of the O2 sensor is effected by the OVP in any way?
Thank you all,

Meza
__________________
Meza
1993 190E 2.6
Advanced Diesel Systems Test and Research Engineer
Reply With Quote