Quote:
Originally Posted by vstech
Post #2.
|
Agreed. And many of our cars of this era used the same part. It is side specific as ready to install however, the plastic piececan be swapped. I think removal requires a 5mm socket allen . sometimes the head strips. Your favorite bolt loosener is your friend. Spray all 4 bolts on all 4 doors then clean the heads, tap the socket home. Crack all 4 bolts on all doors. Grab the electric impact and buzz all 16 bolts into the tool bag. You now have at least 3 spares because usually only the drivers is bad. The most a yard has charged is $1. A drill will take the head off if needed.
__________________
85SD 240K & stopped counting painted, putting bac together. 84SD 180,000. sold to a neighbor and member here but I forget his handle. The 84 is much improved from when I had it. 85TD beginning to repair to DD status. Lots of stuff to do.
|