in the pictures in the post above with the clamps... Is that clamp clamping the return line?

So i guess my method would be to

1. flush the brakes

2. open the bleeder valve to the slave... let it ooze out.

3. connect the slave bleeder to the front right caliper bleeder

4. remove the return line from the reservoir and put it in a clear container. (plug up the reservoir hole that it leaves).

5. open the bleeder for the right caliper, start pumping and watch the clear container to see if liquid start to flow.

6. when good brake fluid starts to flow out (no excess gunk), then re attach that return line to the reservoir.


my only last question , assuming i am correct with that return line, is what is the diameter for the return line that goes into the reservoir... the 3/16 is the size hose i need for the bleed nipples... but what about the return line?

-- Thanks