Quote:
Originally Posted by yuke
Mach 4 where do you purchase the shore 30 urethane at?
|
Use Of Flexane Urethane. Flexane (spelling) Urethane comes in different shore ratings and is normally used to make molds. There are sorces of Urethane in things like in a tube sealants as are used on Homes but you would need to go to the makers website to see what shore spec it drys to.
McMasters Karr, Granger similar companies sell it but you can look on the internet at Amazon and eBay.
There is likely similar products made by other companies.
Cheap engine shock mounts fix
http://www.peachparts.com/shopforum/diesel-discussion/314569-cheap-engine-shock-mounts-fix.html
http://www.peachparts.com/shopforum/general-information/324560-homemade-polyurethane-engine-mounts-bushings.html
When the owner found out the cost of new shock mounts, they elected to (emergency repair) try Polyurethane Construction Adhesive "Liquid Nails" – No. LN-950.
The whole thread from below
http://www.peachparts.com/shopforum/diesel-discussion/308791-380sl-diesel-conversion-project.html
Polyurethane filled motor mounts has shore hardness comparison chart
http://www.peachparts.com/shopforum/3061724-post317.html
I get mine at Reynolds Advanced Materials (
Reynolds Advanced Materials | Everything for Mold Making & Casting), but a Google search for polyurethane casting resin will turn up lots of sources. The critical parameter is
Shore A 30.