View Single Post
  #2  
Old 03-04-2003, 01:58 PM
ctaylor738 ctaylor738 is offline
Super Moderator
 
Join Date: Apr 2000
Location: Falls Church, VA
Posts: 5,316
On my 380SL, which I think is the same basic design, I dosed the shaft-cage joint liberally with PB Blaster, then clamped one end of the shaft in a vice, and turned the cage on the shaft back and forth while applying pressure to pull it off. Then clamped the other end of the shaft and removed the second cage the same way.
__________________
Chuck Taylor
Falls Church VA
'66 200, '66 230SL, '96 SL500. Sold: '81 380SL, '86 300E, '72 250C, '95 C220, 3 '84 280SL's '90 420SEL, '72 280SE, '73 280C, '78 280SE, '70 280SL, '77 450SL, '85 380SL, '87 560SL, '85 380SL, '72 350SL, '96 S500 Coupe
Reply With Quote