Here are some pictures. Let me say that everything I am doing is pretty low quality and not good looking! But it is functional....

I got lucky today and got called for a job interview tomorrow, so unfortunately I won't be able to start getting the pump in until next week.

Pictures:
1. Intercooler hiding in the bumper
2. Current HX30 setup....basically stock with a lot of adapters. (Ps, with air filter set up you can barely hear the turbo, even though the Holsets are known to whistle!)
3. Vehicle in question
4. Manifold. The intake tube is 2.25 in, which is how wide the intake is...might need to modify this again in the future
5. Pump! I believe they offer the side actuator / alda control on higher cc pumps (as shown on website)
-Side note, I don't know what the pump was off of. The serial plate is worn down so no color, but the code ends in RS171. May be from an NA, or possibly a later model GD

Attached Thumbnails

         

__________________
Dan
2005 E320 CDI - 246k
1987 300SDL TD05-16g, Herlevi pump, Elbe manifold, 2.47 LSD - 213k
Past: 1987 300D - 264k