Long while back purchased a replacement tumbler without having it coded, based on the instructions online (which seem to be no longer available) that the pin holding the assembly easily slip out. However, not happening. How do you get it out, or am I forced to buy another that is coded ann loose $100?
B.T.W., the instructions online that used to be available are wrong, as can't press/drift the pinout.
On the old unit, tried drilling out using a drill press since pressing wasn't working, but not enough detent to center the bit, so the bit was wandering and bending. So, I just pried apart the unit. However, this isn't going to work as now the pin can't be removed.
Thank y'all in advance for any help!