Snibble
Behind the silver door handle there is a thin plastic cover that can be popped of with a flat tipped screw driver. There is a phillips screw behind that to be removed. The power seat switch has 2 phillips screws holding it on. Remember that there are 2 phillips screws that are bolted through the large vinyl/plastic door handle, you can feel the 2 holes if you probe with your fingers. Just like
jbaj007 said, slide the door panel up to remove it. With the panel removed and the window rollrd up it should be easier to run the speaker wire through the door jamb rubber boot. Use a straightened out coat hanger to pull the wire through. Keep us informed and do not give up.
