View Single Post
Old 03-09-2003, 03:02 AM
JDUB JDUB is offline
Registered User
Join Date: Apr 2000
Posts: 412
There is no way that they are going to hammer the ball joint out on this vehicle. I used a standard ball joint press on my car with a little help from some other hand tools. The joint is pressed in at a slight angle and can be difficult without some type of press. They will damage something. Most would recommend sending the arm out, which may require a coil spring compressor.
1990 190E 2.6
1996 Grand Voyager 3.3
1985 Mustang GT 5.0 5 SPD
1982 Suzuki GS 750T
Reply With Quote