Panserezha i fixed the moulding and it is easy to do Put it in place ,hold it in with the triangle safety sign. Get it central and i drilled 6 holes and used plastic rivets .You need the same drill to fit the rivet ,it must be a tight fit.So make a few holes in a plate with drill bits then see if the rivet is a knock in fit.As you hit the dowel in the rivit it will open up and lock it in the hole. Now look out for wires inside the trunk lid for the number plate light if it is like mine.The trunk lid light switch has a hole for it but no holes for bubber buffers that stop it banging as you close the trunk lid.I cut them out after i could see their location in the moulding.I used a hole cutter to put the hole in .The clips on the back of the moulding need to be removed first .Or they will rub the trunk lid ,and not sit flat I did try to fit rivets in the location of plastic fixing on the moulding..Any more help needed ask.
|