View Single Post
Old 03-11-2003, 12:20 PM
G-Benz's Avatar
G-Benz G-Benz is offline
Razorback Soccer Dad
Join Date: Apr 2001
Location: Dallas/Fort-Worth
Posts: 5,711
I have a 93, so I'm not sure configuration-wise how much effort is needed to replace.

I suspect it could be a DIY...drain the oil and undo the pan bolts to remove the pan. That would allow access to the oil level sender.

But I would not rule out a problem with the harness attached to the sender. You are not plagued with the harness problems of the W124-series, but even with the main engine harness replaced in mine, I inspected some ancillary harnesses and discovered severe particulary bad harness eventually caused my oil pressure sensor to fail...
2009 ML350 (84K) - Family vehicle
2001 CLK430 Cabriolet (71K) - Wife's car
2005 BMW 645CI (124K) - My daily driver
2012 Mustang V6 (60K) - Daughter's car
Reply With Quote