View Single Post
  #3  
Old 03-16-2003, 08:08 PM
sssammm
Guest
 
Posts: n/a
i lined up the cut out and the bolt is 3/8" below it, it just wouldnt pull up into the cut out

ive put the whole shebang back as it was, i discovered the grinding noise from the pump was the dipstick housing rubbing on the waterpump pulley!!!!!

when the thermostat was changed they aligned the dipstick wrongly

ps IS THE LEFT SENSOR ON THE THEROSTAT HOUSING THE TEMPERATURE SENSOR THAT ACTIVATES THE ELECTRIC FAN?

THANKS

SAM
Reply With Quote